 | | CL200 Loader
The Sx3100's
curved boom loader is constructed out of an oval-shaped curved boom for maximum loader strength. The sight lines from
the operator station to loader bucket are also improved due to the mid-mount design. A non-universal QuickAttach™
system comes standard for increased versatility. With better sight lines, improved strength and greater versatility,
the CL200 will make doing chores around the property quick and efficient. |
 | | CB65 Backhoe
QuickAttach™
system allows you to install or remove the backhoe in minutes as it sets in the cradle with two locking pins. Single
Power Beyond kit powers the backhoe for reliability, control and smooth operation. Dual swing cylinders allow for precise
control of backhoe along foundations and provide more power for backfilling. Curved boom assembly gives the operator
better sight lines when digging.
|
 | | DS60 60" Drive-Over Select
Cut System™ Deck The Drive-Over Select Cut System™ Deck was
designed to provide a high-quality professional-grade cut, excellent durability and ease of operation. A standard striping
kit provides a polished, professional look. The deck can be installed or removed in minutes and is compatible with the
backhoe subframe, greatly improving the versatility and productivity of the Sx3100. |
 | | FM60/FM72 Rear Finishing Mowers
Features
a 10-gauge deck housing and reinforcement plate under the spindle assembly. Rear discharge disperses cuttings cleanly
and evenly. Comes with a wide range of cutting heights from 1” to 4” for clean cuts on all lawns.
Gearbox is highly engineered and rugged with straight-cut gears, casted cooling fins and completely enclosed seals.
The four durable composite rubber caster wheels give a perfectly level cut while eliminating the worry of flat tires.
Category 1, full floating deck allows the mower to follow the contours of the land.
|
| | |
|
 | | RB72 72” Rear Blade
The ½”
steel A-frame is welded to two 4” x 4” steel beams with ¼” thick walls that are fully reinforced.
The rotation plate is constructed from 5/8” thick steel. The 5 forward and 5 reverse positions allows for precise
and consistent grading. The angling plate is constructed from ¼” steel. The 4” outer tubes
and 3.5” inner tube with ¼” thick walls are center cap welded. The 3-position tilt adjustment provides
a wide range of applications. The ¼” rolled moldboard is attached by a ¼” mounting plate.
The ½” x 6” cutting edge is hardened for long life and reversible for even greater life expectancy.
|
 | | LR60/LR72 Landscape Rakes
The A-frame is
constructed from ¼” steel welded to a 3” x 3-1/4” beam for durability and precise control of the
attachment. The rotation plate is constructed from ½” steel. The 5 forward and 5 reverse positions
add versatility for a wide variety of chores. The superior construction of the ¾” steel angle iron mounting
plate gives rigid support to the tines. The hardened tines are 5/16” x 1” and spaced 2” on center
for a high resistance to wear and a cleaner collection of material.
|
 | | RT66 66” Tiller
Features a smooth manual
shift; shifts out to 56” allowing for cleaner sight lines when working close to objects or reaching under objects.
Quick-adjust skid shoes adjust up to a depth of 7-1/4”. Reinforced #80R lateral chain drive has exceptional tensile
strength. The ¼” steel wear plates on the chain case allow it to be in contact with the soil while protecting
it. High carbon rotor shaft allows for deeper working depth and greater longevity of the rotor shaft. Outwardly
turned blades keep the rotor supports clean and maximize working depth.
|
 | | PHD200 Post Hole Digger
Heavy-duty,
2-7/8” x ¼” walled construction of the boom and 2-3/8” x ¼” wall yoke allow for extra
strength in all soil conditions. Grade 2 shear bolt provides greater protection to the tractor drive and gearbox assembly.
Reinforced mounting collar with double flighting keeps the auger end from wearing out. Hardened replaceable cutting
knives allow for fast, clean digs and easy maintenance. Dependable cast-iron gearbox with 540 RPM gives constant digging
power. Large 2” output shaft allows for long life in any soil condition.
|
 | | BS60 Box Scraper
Heavy-duty
A-frame is constructed from ½” thick steel for greater control and strength during grading and backfill operations.
The A-frame and box are attached with a 5/8” thick steel frame making the scraper extremely rigid for uncompromising
control. The 4” x 4-1/2” cross beam is the main structural component. The box is made out of ¼”
thick steel with ¼” thick reinforcement brackets at each corner. The 5/8” hardened steel ripping
shanks with replaceable tips allow them to dig into the toughest soil conditions. Reversible hardened blades give longer
life.
|
| | |
|
 | | RC60 60” Rotary Cutter
Deck housing
is constructed from 10-gauge steel and reinforced with a 10-gauge plate under the gearbox assembly. Features cutting
height adjustment from 1” to 9-1/4” with oval stump jumper. Heavy-duty drive line with shear bolt protection
transfers power smoothly and protects the valuable components of the tractor. Hardened spring steel blades are mounted
on high-carbon steel rotors. Floating top link allows for rotary cutter to follow the contour of the land for clean
and even cutting. Laminated tail |
